Junergy Automotive First Generation 4-Channel ABS (JN144-1)
Category：
Detail
After the application of single channel ABS products, the market for ABS gradually opened up, and the company immediately invested in the development of four channel ABS products. In 2003, the first generation of four channel ABS products was successfully developed.
The fault alarm of JN 144-1 ABS adopts the "automatic flashing code" method. When there is a fault, the ABS warning light automatically flashes a code to report the fault. After repeating 5 cycles, the warning light turns on for a long time. The "automatic flashing code" method is more convenient than traditional methods (manual operation, short circuiting of an ECU to ground before the "flashing code" appears).
The flashing code of JN 144-1 ABS adopts one digit, and sensor and power supply faults use "fast flashing" (one on and one off for 0.5 seconds, flashing faster), while regulator type faults "slow flashing" (one on and one off for 1.5 seconds, flashing slower).
a. Flashing 1 indicates a malfunction of the left front sensor
b. Flashing 2 indicates a fault with the right front sensor
c. Flashing 3 indicates a fault with the right rear sensor
d. Flashing 4 indicates a fault with the left rear sensor
e. Flashing 5 indicates a power failure
f. "Slow flashing 1" indicates front left adjuster failure
g. "Slow flashing 2" indicates that the front right adjuster is faulty
h. "Slow flashing 3" indicates that the right rear regulator is faulty
i. "Slow flashing 2" indicates that the rear left adjuster is faulty
For further details, please contact us
Consultation hotline:+86-13908307100, 13752990427
Office phone:+86 023 63115900, 63115950
Fax:+86-023-67881453
Website: www.jnabs.com
Email: jnabs@jnabs.com
Address: 25th floor, Qibo Building, No. 99 Jinyu Avenue, North New District, Chongqing.
OTHER PRODUCTS
I WANT TO CONSULT